2002 Bombardier Quest 650XT Service Manual, Page 198Get this manual
Section 05 ELECTRICAL Subsection 04 (STARTING SYSTEM)
During the storage period, recheck electrolyte level and specific gravity readings at least every 40 daysAs necessary, keep the battery at its upper level line and near full charge as possible (trickle charge)
ACTIVATION OF NEW BATTERY
WARNING
Never charge or boost battery while installed on vehicleCAUTION: Prior to charging the battery, always remove it from the vehicle to prevent electrolyte spillageA new battery is factory fresh dry chargedFor storage purposes, it is fitted with temporary sealing tubeDo not remove the sealing tube or loosen battery caps unless activation is desiredIn case of accidental premature removal of caps or sealing tube, battery should be given full chargePerform the following operations anytime new battery is to be installed1Remove the sealing tube from the vent elbowInstall vent tube, included in the battery kit, to battery elbow
2Remove caps and fill battery to UPPER LEVEL line with electrolyte (specific gravity: 1.260 at 20C (68F))3Allow the battery to stand for 30 minutes MINIMUM so that electrolyte soaks through battery cells4Allow gas bubbles to escape by lightly shaking battery by hand