2002 Bombardier Quest 650XT Service Manual, Page 163Get this manual
Section 03 ENGINE Subsection 11 (CVT)
BUSHING BORE DIAMETER NEW MINIMUM NEW MAXIMUM SERVICE LIMIT 30.000 mm (1.181 in) 30.002 mm (1.182 in) 30.200 mm (1.189 in)
R610tran19A
1Main shaft support
Inspection
Sliding Half Check bushings no28 for cracks, scratch and for free movement when assembled to sliding halfUsing dial bore gauge measure bushing diameterMeasuring point must be at least mm (14 in) from bushing edgeThis bushing is not replaceableReplace sliding half if bushings no28 are out of specificationVisually inspect coatings1
Fixed Half Check ball bearing for free play and smooth operationReplace if necessaryCheck shaft for heavy wear or visible damageReplace if necessaryIf the shaft is removed, using dial bore gauge, measure bushing diameterMeasuring point must be at least mm (14 in) from bushing edgeThis bushing is not replaceableReplace fixed half if bushing no29 is out of specificationVisually inspect coatingsBUSHING BORE DIAMETER NEW MINIMUM NEW MAXIMUM SERVICE LIMIT 30.000 mm (1.181 in) 30.002 mm (1.182 in) 30.200 mm (1.189 in)