2002 Bombardier Quest 650XT Service Manual, Page 160Get this manual
Section 03 ENGINE Subsection 11 (CVT)
Sliding Half Check sliding half for cracks and sliding contact surface for excessive wearReplace sliding half if necessaryMeasure centrifugal lever pivot bolt boresReplace sliding half if bores are out of specification or otherwise damaged
SLIDING HALF SMALL BUSHING NEW MINIMUM NEW MAXIMUM SERVICE LIMIT 55.000 mm (2.165 in) 55.002 mm (2.166 in) 55.200 mm (2.173 in)
R610tran15A
ACentrifugal lever pivot bolt bore diameter
R610tran11A
CENTRIFUGAL LEVER PIVOT BOLT BORE DIAMETER NEW MINIMUM NEW MAXIMUM SERVICE LIMIT 6.113 mm (.241 in) 6.171 mm (.243 in) 6.300 mm (.248 in)
1Bushing on governor cup side ABore diameter of bushing