2002 Bombardier Quest 650XT Service Manual, Page 156Get this manual
Section 03 ENGINE Subsection 11 (CVT)
To remove belt no5, slip the belt over the top edge of sliding half, as shown
Installation
For installation, reverse the removal procedurePay attention to following detailsThe maximum drive belt life span is obtained when the drive belt has the proper rotation directionInstall it so the arrow printed on belt is pointing towards front of the vehicle
R610tran25A R610tran05A
Inspection
Inspect belt for cracks, fraying or abnormal wearReplace if necessaryCheck drive belt widthReplace if it is out of specification (see table below)DRIVE BELT WIDTH NEW NOMINAL SERVICE LIMIT 32.00 mm (1.260 in) 30.00 mm (1.181 in)