2002 Bombardier Quest 650XT Service Manual, Page 86Get this manual
Section 03 ENGINE Subsection 06 (MAGNETO SYSTEM)
Refer to the following illustration for proper installation of screwsCAUTION: Ensure to reinstall the gasket ring on the screws nos2 and 52 2
Removal
Pry out oil seal with screwdriverCAUTION: Be careful not to damage the oil seal bore when using screwdriver
Installation
NOTE: Never use oil in the press fit area of oil sealR610motr19A
1234567
Screws M6 130 Screws M6 45 Screws M8 65 Screws M6 25 Screws M8 25 Screws M6 45 with sealing ring Screws M6 130 with sealing ring
R610outi02A
Tightening sequence for screws on magneto housing cover is as per following illustration7 12