2002 Bombardier Quest 650XT Service Manual, Page 75Get this manual
Section 03 ENGINE Subsection 05 (COOLING SYSTEM)
Installation
For installation, reverse the removal procedure, paying attention to the following detailsInstall the thermostat cover then torque screws to Nm (80 lbfin)Check coolant level in radiator and coolant tank and top up if necessary
WATER PUMP HOUSING
It is located on the engine MAG side
Removal
R610motr27A
13 screws
thermostat with gasket out of the hole
Drain cooling system and engine oilRemove: engine inlet hose no18 oil filter (refer to MAINTENANCE) screws no3 and no4 retaining water pump housing no5