2002-2003 Bombardier Baja DS650 Service Manual, Page 204Get this manual
Section 10 BODYFRAME Subsection 03 (FRAME)
Welding
Steel Frame: electric welding amperage: 70110 voltage: 2024 rod: E-7014 (332 in)CAUTION: Before performing electrical welding anywhere on the vehicle, unplug the electronic moduleAlso unplug the negative cable and the voltage regulatorThis will protect the electronic module and battery against damage caused by flowing current when weldingNOTE: Install the ground as close as possible to the repaired areaCAUTION: If welding is to be done near plastic material, it is recommended to either remove the part from the area or to protect it with aluminum foil to prevent damage