2001 Bombardier DS 650 Shop Manual 704 100 011, Page 129Get this manual
Section 06 DRIVE TRAIN Subsection 03 (FINAL DRIVE)
1, DRIVE CHAIN
Inspection
With the chain installed on vehicle and the slack adjusted correctly, measure the distance between span of 13 links from pin center to pin center2, SPROCKET
Removal
Lift rear of vehicle and install jack stands under the frame to support the rear of vehicle off the groundRemove RH rear wheel and wheel hub no3Unfasten bolts no14 and nuts no15 retaining sprocket to rear hubRemove sprocket
V02H01A
Installation
CAUTION: Replace chain, sprocket and pinion together to prevent rapid chain and sprocket wearInstall new retaining ring each time the pinion is removedFor installation, reverse the removal procedureInstall sprocket with the flat side on hub side
A403 mm (15-78 in)