2001 Bombardier DS 650 Shop Manual 704 100 011, Page 83Get this manual
Section 03 ENGINE Subsection 08 (CLUTCH)
Unscrew the clutch lock nut no14 then remove tab washerRemove clutch hub no15, clutch basket including thrust washer no16 and needle bearings no17 and no18
Clutch Hub Check grooves of clutch hub for damage or wear caused by steel driven plates
Inspection
Friction Drive Plate Measure the package of friction drive plate thicknessFriction drive plates must be replaced when thickness is 27.5 mm (1.827 in) thick or less for the whole packageFRICTION DRIVE PLATE MINIMUM THICKNESS FOR THE WHOLE PACKAGE 27.5 mm (1.0827 in)
V01D0AA
The friction drive plate maximum warpage should fall through slot of 3.75 mm (.148 in)Steel Driven Plate The steel driven maximum warpage should fall through slot of 1.63 mm (.064 in)The wear limit of the whole package is 11.5 mm (.453 in)Clutch Basket Check slots of clutch basket for damage or wear caused by friction drive platesChange if necessary