1999-2000 Bombardier Traxter ATV Factory Service Manual, Page 212Get this manual
Section 10 BODYFRAME Subsection 02 (BODY)
SEAT CLEANING
It is recommended to clean the seat with solution of warm soapy water, using soft clean clothCAUTION: Avoid use of harsh detergents such as strong soaps, degreasing solvents, abrasive cleaners, paint thinners, etcthat may cause damage to the seat cover
Using pencil and the decal as template, mark the area where decal will be locatedRemove half of the decal back protective film and align decal with marksStart sticking it from center and remove the other half of the film to stick it completelyCarefully squeegee decal beginning at center and working outward using, firm, short, overlapping strokesDECALS HAVING PROTECTIVE FILM ON BOTH SIDES These decals usually contain graphics and are used on plasticINSTALLATION ON PLASTIC Clean surface with isopropyl alcoholUsing pencil and the decal as template, mark the area where decal will be locatedApply an activator (PN 293 530 036) to prepare the surface using clean clothAfter few seconds, when the activator evaporates, the surface is readyCAUTION: Do not use soapy water to locate decal on plastic partsRemove back protective film from decal and carefully align decal with marksWhen well aligned squeegee decal beginning at center and working outward using firm, short, overlapping strokes