1999-2000 Bombardier Traxter ATV Factory Service Manual, Page 193Get this manual
Section 09 BRAKES Subsection 02 (HYDRAULIC BRAKES)
Brake Handle Unscrew the bolt retaining the parking lever lock from brake lever no18 and remove the leverRelease the tension on brake leverRotate cable end bushing so that cable aligns with the brake lever recess, then lift cable end
Inspection
Inspect cable ends for wear or deteriorationReplace if necessary
Installation and Adjustment
V01K0YA
1Push rod jam nut 2Brake pedal return spring
BRAKE CABLE
Removal
NOTE: Before removing brake cable from vehicle, note cable routing for reinstallationBrake Pedal Remove adjusting nut no24 and disconnect brake cable no17 from brake pedal1 2