1999-2000 Bombardier Traxter ATV Factory Service Manual, Page 191Get this manual
Section 09 BRAKES Subsection 02 (HYDRAULIC BRAKES)
Remove brake pads no3 from caliperCAUTION: Don't let the caliper hang by the hose and don't stretch or twist the hose
Check for leaks and make sure the brakes operate normally before driving
Inspection
BRAKE DISC
Inspection
Brake discs no13 can be inspected without removing from the vehicleRaise vehicle and support it securelyRemove wheels and visually inspect disc surfaces for scratches or groovesMake sure to check both sides of discMeasure thickness of the discMinimum thickness is 4.7 mm (0.18 in)Replace disc if not within specificationsCAUTION: Brake discs should never be machinedTurn the disc by hand and check run outDISC MINIMUM THICKNESS DISC RUN OUT (MAX 4.7 mm (0.18 in) 0.25 mm (0.01 in)
V01K0FA
Clip Pin Retaining spring Brake pads