1999-2000 Bombardier Traxter ATV Factory Service Manual, Page 157Get this manual
Section 06 DRIVE TRAIN Subsection 02 (FRONT DIFFERENTIAL)
Drive Shaft Boot
Removal Remove: clamps from rubber boot using boot clamp pliers (PN 295 000 069 and 295 000 054) large end of the boot from plunging joint or CV joint Move apart circlip and pull out the shaft from bearingDo not remove circlip
FRONT DIFFERENTIAL
Removal
Raise front of vehicle, support it securely on jack stands and remove front wheelsRemove: skid plate winch protector front bumper inner fender Refer to BODY 10-02 for the proper instructionsOn LH side, remove: wheel cap no13 cotter pin no12 castellated nut no11 flat washer no10 O-ring no21 On front side, remove: differential mounting bracket bolt front mounting bolt no3 rear mounting bolt no5 differential bracket no22 mounting bracket no2