1999-2000 Bombardier Traxter ATV Factory Service Manual, Page 126Get this manual
Section 05 ELECTRICAL Subsection 05 (IGNITION SYSTEM)
Ignition switch
A quick test to validate it is workingIf the lights turn on in the cluster display just after turning on the key, the ignition switch is goodTest Ensure the MPEM fuse no5 is in good conditionDisconnect ignition switchMeasure voltage between REDGREEN supply wire and the battery groundIf voltage is lower than battery voltage, test the wiringIf voltage is good, test switch
V01G0VA
Replace switch if defectiveIf switch is good, test wiring going to MPEMIf it tests good continue the other tests
Trigger Coil
IMPORTANT: If wires of trigger coil are inverted, no spark will take placeEnsure BLACKYELLOW wire is in cavity of connectorThe trigger coil is not adjustableV01G0UA