1999-2000 Bombardier Traxter ATV Factory Service Manual, Page 123Get this manual
Section 05 ELECTRICAL Subsection 04 (STARTING SYSTEM)
Starting Solenoid
NOTE: Solenoid is located on frame, behind fuse blockEnsure the solenoid receives electric current as followsUsing multimeter, measure the voltage between the following wires when pressing the startstop button with the ignition key turned onWIRE COLOR WHITERED CONNECTOR Position On wiring connecting to solenoid Battery ground post (-) VOLTAGE
If solenoid test good, check the electric starterIf starter test good, the MPEM can be suspectedSee MPEM below
Electrical Cables or Connections
Check all connections, cables and wiresTighten any loose cablesReplace any chafe wirescablesIf wiring and connectors are good, check the electric starterSee below
Electric Starter