1999-2000 Bombardier Traxter ATV Factory Service Manual, Page 82Get this manual
Section 03 ENGINE Subsection 10 (TRANSMISSION)
After clutch housing installation, align mark on shift shaft with mark on indicator shaftInspection
Turn the inner race of each bearing with your fingerThe bearings should turn smoothly and quietlyReplace if necessaryDuring and after transmission disassembly, inspect the condition of each parts closelyIn particular, check for: gear teeth damage worn or scored bearing surfaces worn or scored shifting fork worn or scored shift fork shaft rounded engagement dogs and slots bent shift forks bent shift fork shaft worn shift fork engagement pins worn tracks on shift drum worn splines on shafts and gears
V01E0FA
1Indicator shaft 2Shift shaft 3Transmission actuating lever
Rear Side Reassemble in the reverse order of disassembly