1999-2000 Bombardier Traxter ATV Factory Service Manual, Page 63Get this manual
Section 03 ENGINE Subsection 06 (CYLINDER AND HEAD)
Installation
For installation, reverse the removal procedurePaying attention to the following detailsApply engine oil in cylinder boreUsing ring compressor, slide piston into cylinderInstall bolts no23 in first, then flanged bolts no14, then flanged nuts no13
9, PISTON
Removal
Remove cylinder no7Remove both piston pin circlips no21 then push piston pin no22 out of pistonDetach piston from connecting rod
8, LIFTER
Removal
Remove cylinder no7Pull lifter out of crankcase
Inspection
Inspect piston for scoring, cracking or other damagesUsing micrometer, measure piston at 16 mm (58 in) perpendicularly (90) to piston pin axis
Inspection
Check for excessive clearance between lifter and its bore or straightnessA telescoping gauge and micrometer are used to check the lifter bore clearanceSubtract lifter diameter from lifter bore diameter to determine clearanceLIFTER AND LIFTER BORE mm (in) SERVICE LIMIT Lifter Lifter bore 22.19 mm (0.874 in) 22.27 mm (0.876 in)