2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 225Get this manual
Accelerator Pedal REMOVING
Dislodge the throttle cable holding grommet from the actuator arm; then remove two torx-head screws and nuts securing the accelerator pedal assembly to the splash panel and remove the accelerator pedal
INSTALLING
1With the shifter spring in place on the shift lever, install the shift lever onto the shift axle2Install the shoulder screw and secure with the flange nut (threads coated with blue Loctite #243)Tighten to 20 ft-lb
SpeedometerTachometer LCDIndicator Lights
REPLACING
1Remove the six screws securing the dash panel to the frame; then remove the parking brake handle and jam nut2Slide the dash panel to the rear sufficiently to access the components