2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 198Get this manual
Suspension NOTE: Critical torque specifications are located in Section 1
3Remove the two cap screws and nut securing each rear shock absorber to the frame and lower A-armAccount for bushings and sleeves from each
The following suspension system components should be inspected periodically to ensure proper operationAShock absorber rods bent, pitted, or damagedBRubber damper cracked, broken, or missingCShock absorber body damaged, punctured, or leakingDShock absorber eyelets broken, bent, or crackedEShock absorber eyelet bushings worn, deteriorated, cracked, or missingFShock absorber spring broken or saggingGSway bar mountings tight and bushings secureAF626D
4Using suitable spring compression stand, compress the shock absorber spring, remove the retainer, and remove the spring
! WARNING
Shock absorber springs are under high compression loadsDo not attempt to remove springs without an adequate spring compressorSever injury could result
Shock Absorbers
REMOVING
1Secure the vehicle on support stand to elevate the wheels and to release load on the suspension