2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 194Get this manual
5Using suitable socket and ratchet handle, rotate the jackscrew to push the bearing cup out of the yoke; then remove the tool and the bearing cup PR152A
3Remove the cap screws securing the propeller shaft flange to the yoke flange on the appropriate drive-line; then remove the propeller shaft
6Install the separator tool on the opposite side of the yoke to push the second bearing cup from the yoke; then remove the tool and separate the universal joint7Secure the separator tool in vise and repeat steps 4-6 to remove the bearing cups from the movable yoke