2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 192Get this manual
4Install the caliper onto the caliper holder making sure the caliper and holder are correctly orientedNOTE: It is very important to apply silicone grease to the O-rings and caliper bores prior to assembly PR717A
2Press the piston into the caliper housing using hand pressure onlyCompletely seat the piston; then wipe off any excessive brake fluid
5Making sure brake fluid does not contact the brake pads, compress the caliper holder toward the caliper and install the inner brake pad; then install the outer pad
CAUTION
If brake pads become contaminated with brake fluid, they must be thoroughly cleaned with brake cleaning solvent or replaced with new padsFailure to do so will result in reduced braking and premature brake pad failure