2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 189Get this manual
CLEANING AND INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
INSTALLING
1Secure the brake disc (if applicable) to the hub with the four cap screws coated with red Loctite #271Tighten to 15 ft-lb2Apply grease to the splines in the hub
1Clean all hub components2Inspect all threads for stripping or damage3Inspect the brake disc (if applicable) for cracks or warping4Inspect the hub for pits, cracks, loose studs, or spline wear
REPLACING WHEEL STUDS