2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 179Get this manual
NOTE: Prior to installing the seal, apply High-Performance #2 Molybdenum Disulphide grease to the seal outside diameter
3Tighten the nuts to 38 ft-lb4Pour 275 ml (9.3 fl oz) of SAE 80W-90 hypoid lubricant into the differential and install the fill plugTighten to 16 ft-lb5Align the scribed match marks on the front input drive flange and the front drive yoke flange; then secure with the cap screws tightened to 20 ft-lb
2Using Gear Case Seal Installer Tool, evenly press the seal into the cover bore until properly seated
CAUTION