2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 163Get this manual
5Turn the ignition switch to the OFF position6Select the OHMS position on the meter; then perform the following resistance tests on the TPSThrottle Position Closed
CAUTION
Always make sure the ignition switch is in the OFF position before disconnecting the ECU
A, B, or to Ground to to to C
Infinity (Open) 5.0k 650 4.5k Infinity (Open) 3.8k 1.3k
9Clear all ECU error codes after servicing is complete (see ECU Error Codes in this section)
REMOVING
1Remove the seats and center console; then disconnect the three-wire TPS connector plug
Full-Open