2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 151Get this manual
3When the lever is depressed, the meter must show less than ohmNOTE: If the meter shows more than ohm of resistance, replace the switch Engine Coolant Temperature (ECT) Sensor
1Connect the meter leads (selector in OHMS position) to the sensor terminals2Suspend the sensor and thermometer in container of cooking oil; then heat the oilNOTE: Neither the sensor nor the thermometer should be allowed to touch the bottom of the container or inaccurate readings will occurUse wire holders to suspend the sensor and thermometerPR183A
3The meter must show less than ohmNOTE: If the meter shows more than ohm of resistance, troubleshoot or replace the fan motorNOTE: To determine if the fan motor is good, connect the red wire from the fan connector to 12 volt battery; then connect the black wire from the fan connector to groundThe fan should operate
! WARNING