2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 126Get this manual
2Carefully lower the enginetransmission into position between the engine mounting tabs being careful to keep all cables, wires, and hoses clear; then install the longer, front through-bolt with flat washer PR647
5Lubricate the splines on the front driveshaft with multi-purpose grease; then align the match marks and install the driveshaft into the front output jointPR634A
3Install the rear through-bolts with flat washer; then secure both with new lock nuts and tighten to 40 ft-lb