2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 125Get this manual
7Make sure the locating pins on the front and rear bearings are correctly seated in the crankcase8Install two locating pins into the upper crankcase assembly; then apply thin bead of silicone sealant to the lower crankcase cover
10Install the oil screen; then apply thin bead of silicone sealant to the oil strainer cap and secure with the cap screwsTighten to ft-lb
AT THIS POINT
After completing center crankcase components, proceed to Installing Right-Side Components, to Installing Left-Side Components, and to Installing Top-Side Components