2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 122Get this manual
7Install the drive gear washer and the shift forksThe countershaft is now ready for installation
4Install the countershaft gear onto the countershaft and secure with snap ring (flat-side away from the gear)
Assembling Crankcase Half
1Install the oil pump gerotor assembly and oil pump cover in the crankcase and secure with two cap screwsCoat the threads with blue Loctite #243 and tighten securely to ft-lb
5Using rubber bands to support the connecting rods, carefully install the crankshaft assembly into the crankcase