2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 109Get this manual
Inspecting 1Inspect the water pump drive housing (A) for scoring or discoloration
3Install the two snap rings on the driveshaft (flat side away from the gear)
Installing Right-Side Components
1If equiped with an internal switch, apply silicone to the mating surfaces; then install the gear shift position switch making sure the two contact pins and the two springs are properly positionedTighten the cap screws securely
2Inspect the bearing (B) for smooth rotation and no discoloration or scoring3Inspect the gear (C) for chipped or missing teeth, excessive hub wear, or excessive wear in the drive pin slot4Inspect the drive pin (D) and driveshaft (E) for excessive wear or loosenessCD997