2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 108Get this manual
INSPECTING PRIMARY ONE-WAY DRIVE 1Insert the drive into the clutch housing2Rotate the inner race by hand and verify the inner race rotates only one direction3If the inner race is locked in place or rotates both directions, the drive assembly must be replaced
DRIVEN PULLEY ASSEMBLY
NOTE: The driven pulley is non-serviceable componentIf the pulley faces, cam ramps, or face bushing are worn or loose, the pulley must be replaced as an assemblyDo not disassemble the driven pulley
Servicing Right-Side Components
NOTE: Whenever part is worn excessively, cracked, damaged in any way, or out of tolerance, replacement is necessary
WATER PUMP DRIVE ASSEMBLY
NOTE: Certain models have been built using an external water pump drive assemblyWhen performing service procedures on the water pump, the technician should use sound judgment in determining which type of pump is being serviced