2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 105Get this manual
13Install the starter motor with new O-ring lightly lubricated with grease; then tighten the mounting cap screws to ft-lbGZ226
11Place the key into the keyway in the crankshaft; then wipe all oil from the crankshaft surface and rotorflywheel bore and install the rotorflywheel onto the crankshaft aligning the keyway with the keySecure with the nut (coated with red Loctite #271) and tighten to 105 ft-lb