2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 102Get this manual
7Remove the two cap screws securing the water pump to the crankcase; then remove the water pumpAccount for an O-ring GZ236A
10Remove the cap screw securing the shift cam plate to the shift cam shaft and remove the shift cam plate; then remove the shift shaftAccount for washer
NOTE: The water pump is non-serviceable component and must be replaced as complete assembly
8Remove the cap screws securing the gear shift cover to the crankcase; then remove the gear shift coverAccount for gasket and washerNOTE: Inspect the inside of the left-side cover for any shaft washers that may have come off with the coverMake sure they are returned to their respective shaftsGZ234B