2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 100Get this manual
33Lubricate the camshaft journals and lobes with engine oil; then place the valve cover into position Left-Side Components
NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
AT THIS POINT
To service any one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each sub-section
NOTE: At this point, the rocker arms and adjuster screws must not have pressure on them
NOTE: The enginetransmission does not have to be removed from the frame for this procedure
34Install the top side cap screws with rubber washers; then install the remaining cap screwsTighten only until snug
Removing Left-Side Components
AMagneto CoverStator Coils BWater Pump CShifter Assembly DRotorFlywheelStarter Clutch ESpeed SensorTrigger Assembly