2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 98Get this manual
22Place tab-washer onto the sprocket making sure it covers the pin in the alignment hole CD465
ATV-1027
CAUTION
Care must be taken that the tab-washer is installed correctly to cover the alignment hole on the sprocketIf the alignment pin falls out, severe engine damage will result
25Rotate the crankshaft until the first cap screw (from step 23) can be addressed; then tighten to 11 ft-lbBend the tab to secure the cap screw
23Install the first cap screw (threads coated with red Loctite #271) securing the sprocket and tab-washer to the camshaftTighten only until snug