2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 91Get this manual

2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 91

Installing Piston Rings 1Install the expander spring making sure the ends are aligned on the wire; then install the oil ring with the ring gap 90 from the spring gap and the marking "E TOP" directed toward the top of the piston

CAUTION
Incorrect installation of the piston rings will result in engine damageGZ168

CYLINDERCYLINDER HEAD ASSEMBLY
NOTE: If the cylindercylinder head assembly cannot be trued, they must be replaced
CleaningInspecting Cylinder Head CAUTION
The cylinder head studs must be removed for this procedure

Back to 2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual