2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 46Get this manual

2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual, Page 46

CCylinder Head DValve Cover NOTE: Steps 1-5 in the preceding sub-section must precede this procedure
6Place the chain guide into the cylinder
CAUTION
Care should be taken that the bottom of the chain guide is secured in the crankcase bossCF083

3Lubricate the inside wall of the cylinder; then using ring compressor, compress the rings and slide the cylinder over the pistonRoute the cam chain up through the cylinder cam chain housing; then remove the piston holder and seat the cylinder firmly on the crankcase
CAUTION
The cylinder should slide on easilyDo not force the cylinder or damage to the piston, rings, cylinder, or crankshaft assembly may occur

Back to 2011 Arctic Cat Prowler XT/XTX/XTZ ATV/ROV Service Manual