2011 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 74Get this manual
INSTALLINGWARNING Do not mix tire tread patternsUse the same pattern type on front and rearFailure to heed warning could cause poor handling qualities of the ATV and could cause excessive drive train damage not covered by warranty
1Install each wheel on its hubNOTE: Make sure each wheel is installed on its proper hub as noted in removing (the "rotation arrow" must indicate forward direction of rotation)
TIRE INFLATION PRESSURE
Front and rear tire inflation pressure should be 0.21 kgcm2 (3.0 psi)
2Tighten cap screws to 30 ft-lb
CHECKINGINFLATING
1Using an air pressure gauge, measure the air pressure in each tireAdjust the air pressure as necessary to meet the specified inflation pressure2Inspect the tires for damage, wear, or punctures
! WARNING
Always maintain proper tire inflation pressure
REMOVING