2011 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 61Get this manual

2011 Arctic Cat DVX 90 / 90 Utility ATV Service Manual, Page 61


REMOVING FRONT DRIVE SPROCKET
1With the chain installed and with the rear brake applied, remove the two cap screws securing the spline-lock to the drive sprocket
3Remove the left and right rear wheels4Remove the two axle nuts securing the brake hub to the axle; then remove three cap screws securing the rear sprocket to the sprocket retainer
YT195A YT009A

2Loosen the drive chain (see Adjusting Drive Chain in this sub-section)3Remove the drive sprocket and chain; then remove the sprocket from the chain

Back to 2011 Arctic Cat DVX 90 / 90 Utility ATV Service Manual