2011 Arctic Cat 700 Diesel SD Service Manual, Page 148Get this manual
SteeringFrame The following steering components should be inspected periodically to ensure safe and proper operationAHandlebar grips not worn, broken, or looseBHandlebar not bent, cracked, and has equal and complete full-left and full-right capabilityCSteering post bearing assemblybearing housing not broken, worn, or bindingDBall joints not worn, cracked, or damagedETie rods not bent or crackedFKnuckles not worn, cracked, or damagedGCotter pins not damaged or missingCD666
3Remove the reinstallable rivets securing the steering post cover and remove the cover4Unlatch the storage compartment lid; then slide the storage compartment cover assembly forward and lift off5Remove the four cap screws securing the handlebar caps and instrument pod bracket to the steering post; then move the handlebar out of the wayAccount for four handlebar caps6Remove two cap screws securing the upper steering post bearing to the frameAccount for two bearings and two housings