2011 Arctic Cat 450XC Service Manual, Page 14Get this manual
BACK-UP LIGHTS The back-up lights are located outboard of the taillights brakelightsTo replace the back-up light bulbs, use the following procedure1Remove the taillight housing cover (see taillightsbrakelights in this section)2Remove two screws securing the back-up light socket to the taillight housingAccount for small gasket
2Turn the bulb socket assembly counterclockwise and remove from the housing3Press in and turn the bulb counterclockwise to removePress in and turn clockwise to install the bulb4Insert the bulb socket assembly into the housing and turn it clockwise to secure5Secure the housing cover with the two fastenersRUNNING LIGHTS The running lights are located outboard of the headlightsTo replace the running light bulbs, use the following procedure1Rotate the bulb socket counterclockwise to release from light housing; then press in on the bulb and turn counterclockwise to release from the socket