2011 Arctic Cat 400 TRV ATV Service Manual, Page 131Get this manual

2011 Arctic Cat 400 TRV ATV Service Manual, Page 131


4Apply small amount of grease to the hub splines
8Pump the hand brake lever; then engage the brake lever lock9Secure the hub nut (from step 6) to the shaftTighten to 200 ft-lb10Install new cotter pin and spread the pin to secure the nut11Install the wheel; then using crisscross pattern, tighten to 40 ft-lb12Remove the ATV from the support stand

5Install the hub assembly onto the splines of the shaft6Secure the hub assembly with the nutTighten only until snug

Back to 2011 Arctic Cat 400 TRV ATV Service Manual