2011 Arctic Cat 400 TRV ATV Service Manual, Page 48Get this manual

2011 Arctic Cat 400 TRV ATV Service Manual, Page 48

12Remove the gear position switchAccount for spacer MD1092

9Remove the cap screws holding the clutch cover onto the right-side crankcase halfNote the positions of the different-lengthed cap screws for installing purposes10Using rubber mallet, loosen the clutch cover; then pull it away from the right-side crankcase halfAccount for two alignment pins and gasket

13Remove the one-way clutch noting the direction of the green dot or the word OUTSIDE for installing purposes

Back to 2011 Arctic Cat 400 TRV ATV Service Manual