2011 Arctic Cat 400 TRV ATV Service Manual, Page 6Get this manual
1Clean the ATV thoroughly2Clean the engineRemove the cloth from the exhaust system3Check all control wires and cables for signs of wear or frayingReplace if necessary4Change the enginetransmission oil and filter5Charge the battery; then installConnect the battery cables CAUTION
Connect the positive battery cable first; then the negative
6Check the entire brake systems (fluid level, pads, etc, all controls, headlights, taillight, brakelight, and headlight aim; adjust or replace as necessary7Tighten all nuts, bolts, cap screws, and screws making sure all calibrated nuts, cap screws, and bolts are tightened to specifications8Check tire pressureInflate to recommended pressure as necessary9Make sure the steering moves freely and does not bind10Check the spark plugClean or replace as necessary