2011 Arctic Cat 366SE ATV Service Manual, Page 119Get this manual
NOTE: For additional details on cleaning the mufflerspark arrester, see Periodic Maintenance INSTALLING MUFFLER
1Using new grafoil seal, place the muffler into position engaging the mounting lugs into the grommets; then slide the muffler forward2Install the two exhaust springs
Rear Body PanelRack
REMOVING
1Remove the rear rack; then remove two cap screws securing the rear body panelfender to the side frame and the cap screws securing the rear fenders to the footwells
3Remove the auxiliary brake reservoir from the body but do not disconnect the hose; then route and secure the hose and reservoir out of the way making sure not to spill brake fluid