2011 Arctic Cat 366SE ATV Service Manual, Page 112Get this manual
SteeringFrame The following steering components should be inspected periodically to ensure safe and proper operationAHandlebar grips not worn, broken, or looseBHandlebar not bent, cracked, and has equal and complete full-left and full-right capabilityCSteering post bearing assemblybearing housing not broken, worn, or bindingDBall joints not worn, cracked, or damagedETie rods not bent or crackedFKnuckles not worn, cracked, or damagedGCotter pins not damaged or missingKC307A
4Remove the cotter pins from the inner tie rod ends; then remove the nuts and disconnect the inner tie rod ends
Steering PostTie Rods
REMOVING
1Remove the front body panelfender (see Front Body PanelFender in this section)2Remove the steering post cover; then remove the cap screws securing the handlebar caps and move the handlebar out of the wayAccount for the two handlebar capsKC184A