2011 Arctic Cat 366SE ATV Service Manual, Page 109Get this manual
7Secure the hub assembly with the nutTighten only until snug8Secure the brake caliper to the knuckle with the two "patch-lock" cap screwsTighten to 20 ft-lb9Secure the hub nut (from step 7) to the shaftaxleTighten to 200 ft-lb10Install new cotter pin and spread the pin to secure the nut11Install the wheel and tighten to 40 ft-lb12Remove the ATV from the support standKC297
8Remove the lower shock absorber eyelet from the upper A-arm9Remove the cap screws securing the A-arms to the frame10Remove the circlip from the ball joint; then remove the ball joint from the A-arm
Rear A-Arms
REMOVING
1Secure the ATV on support stand to elevate the wheels
CLEANING AND INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary