2011 Arctic Cat 366SE ATV Service Manual, Page 106Get this manual
6Place the brake caliper assembly into position and secure with new "patch-lock" cap screwsTighten the caliper to 20 ft-lb7Place new crush washer on each side of the brake hose fitting and install it on the caliperTighten to 20 ft-lb8Fill the reservoir; then bleed the brake system (see Periodic Maintenance) ! WARNING
Never use brake fluid from an open container or reuse brake fluidMoisture-contaminated brake fluid could cause vapor build-up (expansion) during hard braking resulting in greatly increased stopping distance or loss of control leading to injury or death
9Install the wheelTighten to 40 ft-lb10Remove the ATV from the support stand and verify brake operation
Troubleshooting Drive System