2011 Arctic Cat 366SE ATV Service Manual, Page 99Get this manual
3Inspect the gear case seals for nicks or damage DISASSEMBLING AXLES
1Using side-cutters (or suitable substitute), remove the large clamp from the boot
5Inspect the splines of the shaft, the bearing ring, and the housing for damageNOTE: If any damage is apparent to the splines, the bearing ring, andor the housing, the drive axle must be replaced as an assembly
2Wipe away excess grease to access the retaining ringUsing an awl, remove the circlip
6Using side-cutters (or suitable substitute), remove the small clamp from the shaft