2011 Arctic Cat 366SE ATV Service Manual, Page 87Get this manual
Front Differential REMOVING DIFFERENTIAL
1Secure the ATV on support stand to elevate the wheels
! WARNING
Make sure the ATV is solidly supported on the support stand to avoid injuryAG925
3While holding the actuator firmly forward, tighten the front cap screw to hold the actuator in place; then install but do not tighten the two remaining cap screws
2Remove the drain plug and drain the gear lubricant into drain pan; then reinstall the plug and tighten to 45 inlb
ATV0082A KC295A