2011 Arctic Cat 366SE ATV Service Manual, Page 59Get this manual
3From the right side, install the crankcase cap screws noting the location of the different-sized cap screws; then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs while tightening the cap screws Installing Engine Transmission
1From the right side, place the enginetransmission into the frame tilting the top-side forward to clear the frame member
4From the left side, install the remaining crankcase cap screws; then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs while tightening the cap screws
2Install the front and rear engine mounting throughbolts and secure with the flange nutsTighten to 38 ft-lb3Align the front and rear output flanges with the drive couplers; then secure with the screws and tighten to 20 ft-lb